Hilti pull tester

Hire a Bolt Testing Kit from Inlec UK for next day delivery. Shop with confidence on eBay! Location of identification data on the tool. HAT pull -out tester.

The type designation and serial number are printed on the type plate on the tool.

Onsite testing during design phase. During the design phase – determine the resistance of a base material and which fastening system to use. After installing anchor systems – determine quality and safety. On Site Testing: Pull out test.

At the site it is often seen that doing the tensile test on the anchors becomes very important. The anchors are then tested on site in the presence. After the tests are completed a report containing the test data and is provided.

It consists of a mechanical screw arrangement acting through a hydraulic load cell which measures the load applied to the fastener directly.

Hydrajaws has built and developed a range of Testers and Accessories to determine the reliability and load capacity of fixings including Pull Test Kit for Scaffold Anchors, Anchor bolt testers, Scaffold Tie Tester Kits, Safety Lifeline Testers, Material Bond Testers and Rebar Testers. See our product page for the full range of . PULL -OUT TEST RESU LTS OF HILTI FASTENING SYSTEMS. PULL – OUT TEST oF HILTI FASTENING SYSTEMS. Research Laboratory Section. IMichigam State Highway Commission.

N and 0-20kN) with calibration certificate. The Elcometer 1Adhesion Tester is a portable pull -off adhesion gauge used to provide a numerical value for coating adhesion on steel, aluminium, concrete etc. The kit includes a combination of threaded rod and stud adaptors, hexagon extension legs and other accessories, and can test pull -out loads of a wide range . We manage our tools so you can manage your business.

Hilti DPG1Anchor tester. Includes tester DPG 1with digital testing gauge 0-100kN for testing of all types of anchors M- M2 including thread adapters, threaded rods, a ring wrench, spacer, and intermediate spacer. It will cost asmall fortune for someone to do this for you. Have you ever seen a Mackem punch a horse.

What our approved testers offer. The Construction Fixings Association Approved Tester Scheme is intended to provide specifiers, contractors and site engineers with a network of companies throughout the UK who are capable of testing the majority of construction fixings, and in some cases certain specialist anchor systems, .

Working Hours for Test Request (Monday – Friday) (9am – 6pm) 4. There will be extra charges should there be any overnight and weekend testing 5. Testing Personnel will wait 45mins from the agreed time and will leave for the next appointment should the testing cannot commence. Do note that the pull -out test will be . The penetration depth is then recorded. A ratio of the pull -out force to the depth of . Confirms the holding load of anchors in a variety of construction materials.

Check live stock availability today at HSS.